Warning: Last items in stock!
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 loyalty points that can be converted into a voucher of $0.40.
Skill Level: Beginner
Stop your volume pedal from destroying your tone!
Now has an LED to light up the inside of your pedal!!!!
There is also a switch to turn it on/off on the circuit board. Chose the color of the LED from the color picker above.
The Griffin Effects Buffer Retrofit adds and input and ouput buffer to the pedal. This does two things. It isolates the pickups to prevent loading of the volume pot and removes the series resistance of the pot combining with the capacitance to ground of the guitar cable. The tone that goes in is the tone that comes out!
This kit is for the passive volume pedals. After installation, your pedal will be an active pedal and require a standard 2.1 center negative power supply (not included). The volume pedals circuit board will be replaced with a new one. This new one will have a DC jack (no drilling required) on it which can be accessed from between the treadle and the base of the pedal.
The Griffin Effects Buffer Retrofit kit comes without jacks. You can remove the jacks from your existing board and use them or get new jacks found here: Part # E14JACKM
The buffer comes with a DC jack installed. A DC cable extension is available to make plugging a power supply in a lot easier if you plug and unplug it often. Choose "DC Extension" in the Power drop-down menu above to add it to your order.
Some volume pedals have a taper switch or pot. Installing this retrofit will remove this function. This retrofit will not work on stereo pedals. Soon a retrofit will be made that incorporates these functions.
This kit has been sucessfully installed on these following VPJR versions:
If you version isn't listed, contact us and we can help see if it will work for your pedal
Power consumption: 3.5mA with LED off.