DPDT footswitch. Use this switch to replace a switch that is faulty or use it to true bypass a pedal. These latching switches are normally used for true bypassing a pedal or for switching between a set of capacitors, resistors, etc.
This is a high quality switch with solder lugs.How this switch works:
Initial State: The two center lugs are connected to a set of outer lugs.
Pressed: The center lugs now connect to the other set of outer lugs. Disconnecting from the previous set of outer lugs.
Pressing it again returns the switch to the initial state.
- Lock Washer
- Nylon Washer
- Two Nuts
- DPDT Latching ON-ON
- Solder Lug Terminals