Only 1 left!!!! This one is used but it's working fine. It was our prototype board we used to test the circuit out so there is solder where we hooked up wires to the solder pads.
These were extra PCB's for a customer project. We populated them and they are ready to be wired up in any of your projects.
This is a part-for-part clone of the Boss RV-3 input and output buffers. We added send and return pads so you can put whatever circuit you want between the buffers. You can
either hardwire it to a circuit or add jacks and put whatever pedal you want between the buffers.
You can also use it as a stand-alone buffer if you want.
Excellent buffers and the basic instructions are downloaded below.
If you need any help hooking it up we are always glad to help also!